Data Transfer And Caliper Product

According to ISO868, ISO7619, ASTM D 2240 Average and peak Dwell time is adjustable Low and high limits with judgement 500 memories Wireless connection to printer Handhold use or work with test stand ode Automatic power off (max.) mode (c ISH-DS-Stand).

Reading in digit and analog Display can be rotated by 320º Button function: Tolerance Go and No-Go display, data preset, measuring direction change, max./min./range measurement, inch/metric conversion, absolute/incremental measurement CR2032 battery, automatic power off Data output Optional accessory: data output system.

Measure the groove diameter of shafts and keyways Graduation 0.01mm Non-rotating spindle Ratchet stop Supplied with setting standards (except 0-25mm)

Made of Stainless Steel Satin chrome plated reading surface.

We are a leading Authorized Wholesale Dealer of insize digital inside knife edge caliper, insize digital tube thickness caliper, insize digital caliper, insize digital offset caliper and insize digital offset centerline caliper from Ahmedabad, India.

Aluminum frame Magnetic bottom The display flips over when the bottom faces up The back-light is on automatically when in use, and automatically off in 15 minutes after use The sea level is permanently set inside the chip, zero setting is not needed when battery is replaced Buttons: ON/OFF, zero, absolute and incremental measurement One AAA battery Automatic power off in 5 minutes.

With external sensor, to test torque wrenches, torque screwdrivers and other torque tools Clockwise and counter-clockwise operation Peak and track working modes Unit: N.m, in.lb, kg.cm Target torque value can be set (9 target torque values can be saved and selected quickly), with audible and visible alarm: Green LED light on and buzzer sounds when the value is 90%~100% of target torque Both green and red LED light on and buzzer sounds when the target torque value is reached Memory of 250 measurement values for browsing and output Power off in 5 minutes automatically.

Jeweled bearing Supplied with limit pointers and bezel clamp Optional accessory: backs (page 132), contact points (page 128~131).

Jeweled bearing Carbide contact point Two measuring directions Anti magnetic body Supplied with two clamps: diameter Ø4mm and Ø8mm Optional accessory: styli (page 138).

Stainless steel spindle tip and anvil.

Reading in digit and analog Display can be rotated by 320º Button function: tolerance Go and No-Go display, data preset, measuring direction change, max./min./range measurement, inch/metric conversion, absolute/incremental measurement CR2032 battery, automatic power off Data output Optional accessory: data output system, backs (page 132), contact points (page 128~131).

Meet DIN862 Made of stainless steel Satin chrome plated reading surface.

Can take pictures and videos supplied with software.

Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inch Automatic power off, move the digital unit to turn on power Battery CR2032 Data output Meet DIN862 Made of stainless steel Optional accessory: data output system.

Graduation: Metric 0.01mm imperial 0.0001" Carbide measuring faces Meet DIN863 Supplied with setting standards (except 0-25mm and 0-1") Supplied with manufacturer calibration certificate.

13 roughness parameters with probe position indicator Connected with printer via bluetooth (code ISR-C100-Printer) can display roughness values, profile, and curve Memory of maximum 100 results Automatic power off.

Resolution 0.001mm/0.00005" Button function: on/off, set, mm/inch, ABS/INC Data output Battery CR2032, automatic power off Carbide measuring faces Ratchet friction thimble Supplied with spherical anvil Setting standards are included (except 0-25mm/0-1") Optional accessory: data output system.

We are a leading Authorized Wholesale Dealer of coating thickness gage, coating thickness gauge, ultrasonic thickness gage (through coating) and ultrasonic thickness gage from Ahmedabad, India.

Data Collection: 

1) Single collection: press the read button once to collect the reading from measuring tool once. 
2) Multi collection: press the read button once to start collecting readings from measuring tools continuously, press the button again to stop collecting. Total collection times and interval time can be adjustable.

Graduation: 0.02mm/0.001" Adjustable main scale to set zero Carbide tipped scriber Satin chrome plated scale Supplied with magnifier With fine adjustment made of stainless steel (except the base) Optional accessory: dial test indicator holder (code 6293-6), not suitable for 1250-1000.

Vertical travel of holder: 150mm Fine adjustment range: 2mm

Measure coordinate of point measure distance between two objects measure coordinate of line measure center coordinate, radius of circle with three points set origin of coordinate measure angle with four points or two lines coordinate transform set of coordinate.

For digital/dial indicators and dial test indicators.

Include : 

1) Digital caliper, range 0-150mm/0-6", resolution 0.01mm/0.0005", (code 1108-150) 
2) Outside micrometer, range 0-25mm, graduation 0.01mm (code 3202-25A) 
3) Dial indicator, range 10mm, graduation 0.01mm (code 2308-10A) 
4) Magnetic stand (code 6201-60) 
5) Protractor, range 0-180°, graduation 1° (code 4799-180)
6) Pitch gauge, range 0.25-7mm, 24pcs, metric 60° thread (code 4820-124) 
7) Radius gauge, range 1-7mm (code 4801-17) 
8) Feeler gauge, range 0.05-1.00mm, 20pcs (code 4602-20) 
9) 90° beveled edge square, 100x70mm, grade 0 (code 4790-1000) 
10) Scriber (code 7230) 
11) Steel rule, 150mm/6" (code 7110-150) 
12) Depth base attachment (code 6140) 
13) Zero setting bar.

Operation system: Windows 7 Language: English, Korean, Chinese.

Measure coordinate of point measure distance between two points measure center coordinate, axis length and area of ellipse find midpoint of a line Combined measuring tools: find tangent lines between point and circle find angular bisector between two lines measure distance from circle to line find intersection points between two circles find tangent lines between two circles measure center coordinate, diameter and area of circle measure length and diameter of arc measure distance from point to line measure angle between two lines measure distance between two lines find intersection points between circle and line  measure distance between two circles Smooth tools: Smooth the edge, make the measurement more accuracy.

Focus distance: ~ liquid with -10°C~85°C 2mm, depth of view: 5 100mm Dust/waterproof level: IP67 Can be used in the temperature.

Push and pull test Units: N, gf, kgf, ozf, lbf 500 memories Automatic power off Metal case LCD display with back-light, can turn 180º Overload alarm.

Linear Scale

Leading Authorized Wholesale Dealer of three ways magnifier with illumination, folding magnifier with illumination, 2.5x, folding magnifier with illumination, 10x and magnifier with illumination, 2x from Ahmedabad.

Software is supplied with interface boxes. In the software, it is possible to set tolerance of each channel and show judgment (red when out of tolerance, green when within tolerance), set zero, collect data manually or automatically (time is adjustable), output data to Excel, print report.

Our range of products include torque screwdrivers, torque screwdriver and digital torque screwdriver.

Our product range includes a wide range of magnetic brinell/rockwell hardness tester and aluminum alloys levels.

Our range of products include 60 degree glossmeter and gloss meter.

Prominent & Leading Authorized Wholesale Dealer from Ahmedabad, we offer combination square set and digital level & protractor.

Hardened cast-iron guide surface Supplied with V slot/center tailstock and roller tailstock V slot for cylinder Ø5 ~ 33mm.

Offering you a complete choice of products which include non-contact digital tachometer.

Shockproof dial indicator Made of stainless steel.
Supplied with manufacturer calibration certificate.

Offering you a complete choice of products which include steel gage block set.

Accuracy 2μm Applicable diameter: Ø3.5mm - Ø25mm Dial indicator holder is included.