Bearing & Tool Centre
Bearing & Tool Centre
Send Email
0804896258089% Response Rate
Search

Home » Our Products


Data Transfer And Caliper Product

We are actively engaged in wholesaling and Supplying highly reliable assortment of Data Transfer & Caliper product. These are widely acknowledged among precious clients for their unmatched quality, robust construction, durability and user-friendly nature.


Hardness TesterGet Quotation
According to ISO868, ISO7619, ASTM D 2240 Average and peak Dwell time is adjustable Low and high limits with judgement 500 memories Wireless connection to printer Handhold use or work with test stand ode Automatic power off (max.) mode (c ISH-DS-Stand).

Yes! I am interested




Special MicrometerGet Quotation
Measure the groove diameter of shafts and keyways Graduation 0.01mm Non-rotating spindle Ratchet stop Supplied with setting standards (except 0-25mm)

Yes! I am interested




Internal and External Diameter MeasurementGet Quotation
Reading in digit and analog Display can be rotated by 320º Button function: Tolerance Go and No-Go display, data preset, measuring direction change, max./min./range measurement, inch/metric conversion, absolute/incremental measurement CR2032 battery, automatic power off Data output Optional accessory: data output system.

Yes! I am interested




Depth MeasurementGet Quotation
Made of Stainless Steel Satin chrome plated reading surface.

Yes! I am interested




Levelling InstrumentsGet Quotation
Aluminum frame Magnetic bottom The display flips over when the bottom faces up The back-light is on automatically when in use, and automatically off in 15 minutes after use The sea level is permanently set inside the chip, zero setting is not needed when battery is replaced Buttons: ON/OFF, zero, absolute and incremental measurement One AAA battery Automatic power off in 5 minutes.

Yes! I am interested




Special VerniersGet Quotation
We are a leading Authorized Wholesale Dealer of digital blade caliper, insize digital gear tooth caliper, digital inside point caliper, digital outside point caliper and insize digital tube thickness caliper from Ahmedabad, India.

Yes! I am interested




Dial IndicatorGet Quotation
Jeweled bearing Supplied with limit pointers and bezel clamp Optional accessory: backs (page 132), contact points (page 128~131).

Yes! I am interested




Dial Test IndicatorGet Quotation
Jeweled bearing Carbide contact point Two measuring directions Anti magnetic body Supplied with two clamps: diameter Ø4mm and Ø8mm Optional accessory: styli (page 138).

Yes! I am interested






Torque Tester Torque WrenchGet Quotation
With external sensor, to test torque wrenches, torque screwdrivers and other torque tools Clockwise and counter-clockwise operation Peak and track working modes Unit: N.m, in.lb, kg.cm Target torque value can be set (9 target torque values can be saved and selected quickly), with audible and visible alarm: Green LED light on and buzzer sounds when the value is 90%~100% of target torque Both green and red LED light on and buzzer sounds when the target torque value is reached Memory of 250 measurement values for browsing and output Power off in 5 minutes automatically.

Yes! I am interested




Roughness TesterGet Quotation
13 roughness parameters with probe position indicator Connected with printer via bluetooth (code ISR-C100-Printer) can display roughness values, profile, and curve Memory of maximum 100 results Automatic power off.

Yes! I am interested






Outside MicrometerGet Quotation
Graduation: Metric 0.01mm imperial 0.0001" Carbide measuring faces Meet DIN863 Supplied with setting standards (except 0-25mm and 0-1") Supplied with manufacturer calibration certificate.

Yes! I am interested




Digital CaliperGet Quotation
Resolution: 0.01mm/0.0005" Buttons: on/off, zero, mm/inch Automatic power off, move the digital unit to turn on power Battery CR2032 Data output Meet DIN862 Made of stainless steel Optional accessory: data output system.

Yes! I am interested




Digital MicrometerGet Quotation
Resolution 0.001mm/0.00005" Button function: on/off, set, mm/inch, ABS/INC Data output Battery CR2032, automatic power off Carbide measuring faces Ratchet friction thimble Supplied with spherical anvil Setting standards are included (except 0-25mm/0-1") Optional accessory: data output system.

Yes! I am interested




Comparator StandGet Quotation
Vertical travel of holder: 150mm Fine adjustment range: 2mm

Yes! I am interested






Digital IndicatorGet Quotation
Reading in digit and analog Display can be rotated by 320º Button function: tolerance Go and No-Go display, data preset, measuring direction change, max./min./range measurement, inch/metric conversion, absolute/incremental measurement CR2032 battery, automatic power off Data output Optional accessory: data output system, backs (page 132), contact points (page 128~131).

Yes! I am interested




Height MeasurementGet Quotation
Graduation: 0.02mm/0.001" Adjustable main scale to set zero Carbide tipped scriber Satin chrome plated scale Supplied with magnifier With fine adjustment made of stainless steel (except the base) Optional accessory: dial test indicator holder (code 6293-6), not suitable for 1250-1000.

Yes! I am interested




Measuring Tool SetGet Quotation
Include : 

1) Digital caliper, range 0-150mm/0-6", resolution 0.01mm/0.0005", (code 1108-150) 
2) Outside micrometer, range 0-25mm, graduation 0.01mm (code 3202-25A) 
3) Dial indicator, range 10mm, graduation 0.01mm (code 2308-10A) 
4) Magnetic stand (code 6201-60) 
5) Protractor, range 0-180°, graduation 1° (code 4799-180)
6) Pitch gauge, range 0.25-7mm, 24pcs, metric 60° thread (code 4820-124) 
7) Radius gauge, range 1-7mm (code 4801-17) 
8) Feeler gauge, range 0.05-1.00mm, 20pcs (code 4602-20) 
9) 90° beveled edge square, 100x70mm, grade 0 (code 4790-1000) 
10) Scriber (code 7230) 
11) Steel rule, 150mm/6" (code 7110-150) 
12) Depth base attachment (code 6140) 
13) Zero setting bar.

Yes! I am interested




Thickness GaugeGet Quotation
We are a leading Authorized Wholesale Dealer of ultrasonic thickness gage (through coating), ultrasonic flaw detector, coating thickness gage and external thread measuring device from Ahmedabad, India.

Yes! I am interested




Magnetic StandsGet Quotation
For digital/dial indicators and dial test indicators.

Yes! I am interested




Force GageGet Quotation
Push and pull test Units: N, gf, kgf, ozf, lbf 500 memories Automatic power off Metal case LCD display with back-light, can turn 180º Overload alarm.

Yes! I am interested




Profile ProjectorGet Quotation
Measure coordinate of point measure distance between two objects measure coordinate of line measure center coordinate, radius of circle with three points set origin of coordinate measure angle with four points or two lines coordinate transform set of coordinate.

Yes! I am interested




MagnifierGet Quotation
Leading Authorized Wholesale Dealer of three ways magnifier with illumination, magnifier with illumination, 2x and folding magnifier with illumination from Ahmedabad.

Yes! I am interested




Data TransferGet Quotation
Data Collection: 

1) Single collection: press the read button once to collect the reading from measuring tool once. 
2) Multi collection: press the read button once to start collecting readings from measuring tools continuously, press the button again to stop collecting. Total collection times and interval time can be adjustable.

Yes! I am interested






Torque ScrewdriverGet Quotation
Our range of products include torque screwdriver s, torque screwdriver ist mg100 and digital torque screwdriver.

Yes! I am interested




Vision Measuring SystemGet Quotation
Operation system: Windows 7 Language: English, Korean, Chinese.

Measure coordinate of point measure distance between two points measure center coordinate, axis length and area of ellipse find midpoint of a line Combined measuring tools: find tangent lines between point and circle find angular bisector between two lines measure distance from circle to line find intersection points between two circles find tangent lines between two circles measure center coordinate, diameter and area of circle measure length and diameter of arc measure distance from point to line measure angle between two lines measure distance between two lines find intersection points between circle and line  measure distance between two circles Smooth tools: Smooth the edge, make the measurement more accuracy.

Yes! I am interested




Industrial Rigid Borescope , Videoscope Get Quotation
Focus distance: ~ liquid with -10°C~85°C 2mm, depth of view: 5 100mm Dust/waterproof level: IP67 Can be used in the temperature.

Yes! I am interested




HardnessGet Quotation
Our product range includes a wide range of aluminum alloys levels and magnetic brinell/rockwell hardness tester.

Yes! I am interested




Bench CenterGet Quotation
Hardened cast-iron guide surface Supplied with V slot/center tailstock and roller tailstock V slot for cylinder Ø5 ~ 33mm.

Yes! I am interested




GlossmeterGet Quotation
Our range of products include 60 degree glossmeter and digital gloss meter.

Yes! I am interested




Concentricity GageGet Quotation
Accuracy 2μm Applicable diameter: Ø3.5mm - Ø25mm Dial indicator holder is included.

Yes! I am interested




Vision Measuring MachineGet Quotation
We are a leading Authorized Wholesale Dealer of quick measurement systems from Ahmedabad, India.

Yes! I am interested




Dial CaliperGet Quotation
Shockproof dial indicator Made of stainless steel.
Supplied with manufacturer calibration certificate.

Yes! I am interested




Linear GageGet Quotation
Software is supplied with interface boxes. In the software, it is possible to set tolerance of each channel and show judgment (red when out of tolerance, green when within tolerance), set zero, collect data manually or automatically (time is adjustable), output data to Excel, print report.

Yes! I am interested




Tool PresetterGet Quotation
Our range of products include insize tool presetter.

Yes! I am interested




Slip GaugeGet Quotation
Offering you a complete choice of products which include steel gage block set.

Yes! I am interested




Angle MeasurmentGet Quotation
Prominent & Leading Authorized Wholesale Dealer from Ahmedabad, we offer combination square set.

Yes! I am interested




New ItemsGet Quotation
contour measuring machine, kristeel feeler gauge, 1d height gauge, wire gauge s and milling machine vice swivel

Yes! I am interested




 


Contact via E-mail
Contact via SMS
Jalpa Mehta (C.E.O)
Bearing & Tool Centre
1st Floor,, Vyapar Bhavan, Relief Road,Odhav
Ahmedabad - 380001, Gujarat, India
Call Us: 
Call Response Rate: 89%
Share Us :



Home  |   About Us   |  Our Products  |  Site Map  |   Contact Us

© Bearing & Tool Centre. All Rights Reserved (Terms of Use)
Developed and Managed by IndiaMART InterMESH Limited

Bearing & Tool Centre